Dodge Intrepid Service Manual page 655

21 - 108 TRANSAXLE
INPUT CLUTCH ASSEMBLY (Continued)
(4) Pry up and remove reverse clutch reaction
plate (Fig. 262) (Fig. 263).
Fig. 262 Pry Reverse Clutch Reaction Plate
1 - REVERSE CLUTCH REACTION PLATE
2 - SCREWDRIVER
3 - SCREWDRIVER
Fig. 263 Reverse Clutch Reaction Plate
1 - REVERSE CLUTCH REACTION PLATE (INSTALL FLAT SIDE
DOWN)
(5) Remove the reverse clutch pack (two fibers/one
steel) (Fig. 264).
NOTE: Tag reverse clutch pack for reassembly iden-
tification.
Fig. 264 Reverse Clutch Pack
1 - REVERSE CLUTCH PLATE
2 - REVERSE CLUTCH DISC
(6) Remove the OD/Reverse reaction plate snap
ring (Fig. 265).
Fig. 265 OD/Reverse Pressure Plate Snap Ring
1 - OD/REVERSE PRESSURE PLATE
2 - SCREWDRIVER
3 - OD/REVERSE PRESSURE PLATE SNAP RING
LH