Dodge Intrepid Service Manual page 623

21 - 76 TRANSAXLE
FINAL DRIVE (Continued)
(8) Using suitable snap ring pliers, remove long
stub shaft snap ring (Fig. 162).
Fig. 162 Remove Long Stub Shaft Snap Ring
1 - SNAP RING
2 - SNAP RING PLIERS
3 - LONG STUB SHAFT
(9) Using slide hammer C-3752 and remover
8420A, remove long stub shaft from transaxle (Fig.
163).
Fig. 163 Remove Long Stub Shaft
1 - LONG STUB SHAFT
2 - SPECIAL TOOL 8420A
3 - SLIDE HAMMER C-3752
CAUTION: Driveshaft retainer clips and seals
located on the stub shafts must be replaced before
reinstalling halfshafts.
(10) Remove inner differential adjuster lock (Fig.
164).
Fig. 164 Remove Inner Differential Adjuster Lock
1 - INNER DIFFERENTIAL ADJUSTER LOCK
2 - INNER DIFFERENTIAL ADJUSTER
(11) Remove differential outer adjuster lock (Fig.
165).
Fig. 165 Remove Outer Adjuster Lock
1 - OIL SEAL
2 - OUTER ADJUSTER
3 - STUB SHAFT
4 - SOCKET
5 - ADJUSTER LOCK
LH