Dodge Intrepid Service Manual page 850

LH
REAR DOOR GLASS RUN
WEATHERSTRIP
REMOVAL
(1) Remove door glass (Refer to 23 - BODY/
DOORS - REAR/DOOR GLASS - REMOVAL).
(2) Pull weatherstrip from lower rear channel
above door latch (Fig. 6).
(3) Pull run weatherstrip from window frame
channel.
1 - REAR DOOR MOLDING
2 - GLASS RUN
3 - REAR GLASS RUN CHANNEL
INSTALLATION
(1) Clean butyl material from door flange area.
(2) Place door run weatherstrip in position on win-
dow frame channel.
(3) Push door run weatherstrip in position on win-
dow frame channel.
(4) Push weatherstrip into lower rear channel above
door latch.
(5) Install door glass (Refer to 23 - BODY/DOORS -
REAR/DOOR GLASS - INSTALLATION).
Fig. 6 REAR DOOR GLASS RUN
4 - REAR DOOR
5 - FRONT GLASS RUN CHANNEL
WEATHERSTRIP/SEALS 23 - 113