Dodge Intrepid Service Manual page 657

21 - 110 TRANSAXLE
INPUT CLUTCH ASSEMBLY (Continued)
(10) Remove and inspect #3 & #4 thrust washers
(Fig. 270).
Fig. 270 #3 & 4 Thrust Washers
1 - #3 THRUST PLATE (3 TABS)
2 - OD SHAFT ASSEMBLY
3 - #4 THRUST PLATE (3 SLOTS)
(11) Remove the underdrive shaft assembly (Fig.
271).
Fig. 271 Underdrive Shaft Assembly
1 - #3 THRUST WASHER (5 TABS)
2 - UNDERDRIVE SHAFT ASSEMBLY
(12) Remove the #2 needle bearing (Fig. 272).
Fig. 272 No. 2 Needle Bearing
1 - #2 NEEDLE BEARING (NOTE 3 TABS)
NOTE: The OD/UD Reaction Plate, Snap Rings, and
Input Clutch Retainer is not interchangeable with
previous year 41TE components. The snap rings
are thicker and the position of the ring lands have
changed.
(13) Remove the OD/UD reaction plate tapered
snap ring (Fig. 273).
Fig. 273 Tapered Snap Ring
1 - OVERDRIVE/UNDERDRIVE CLUTCHES REACTION PLATE
TAPERED SNAP RING
2 - SCREWDRIVER (DO NOT SCRATCH REACTION PLATE)
LH