Dodge Intrepid Service Manual page 534

LH
PUMP (Continued)
Fig. 9 Power Steering Fluid Supply Hose At Power
Steering Pump
1 - POWER STEERING FLUID SUPPLY HOSE
2 - POWER STEERING PUMP
(7) Remove the power steering fluid pressure hose
(Fig. 10) from the pressure fitting on the power steer-
ing pump.
Fig. 10 Pressure Hose At Power Steering Pump
1 - POWER STEERING PUMP
2 - POWER STEERING FLUID PRESSURE HOSE
(8) Let remaining power steering fluid drain from
the power steering pump.
(9) Loosen the lock-nut (Fig. 11) on the front of the
pulley for the serpentine drive belt tensioner.
(10) Using the adjustment bolt (Fig. 11) remove
the tension from the drive belt for the power steering
pump.
(11) Remove the drive belt from the power steering
pump pulley.
Fig. 11 Drive Belt Tensioner Lock-Nut And
Adjustment Bolt
1 - ADJUSTMENT BOLT
2 - POWER STEERING PUMP
3 - LOCK-NUT
4 - DRIVE BELT
NOTE: Access for the power steering pump mount-
ing bolts is through the holes in the face of the
power steering pump pulley.
(12) Remove the 3 bolts attaching the power steer-
ing pump to the power steering pump mounting
bracket.
(13) Remove the power steering pump from the
engine. The power steering pump and pulley are
removed as an assembly from the engine. The power
steering pump is removed from the bottom of the
engine between the radiator lower support and the
cradle (Fig. 12).
Fig. 12 Power Steering Pump Remove/Install
1 - RADIATOR LOWER SUPPORT
2 - POWER STEERING PUMP
3 - CRADLE
PUMP 19 - 57