Dodge Intrepid Service Manual page 804

LH
CENTER CONSOLE SIDE PANELS (Continued)
REMOVAL
(1) Remove shift knob.
(2) Remove console shift bezel (Fig. 8).
(3) To remove right side panel, open glove box and
remove side panel attaching screws.
(4) To remove left side panel, remove steering col-
umn cover and remove side panel attaching screws.
(5) Disengage clips from center console.
(6) Remove floor console side panel.
INSTALLATION
INSTALLATION - CONCORD
(1) Place front floor console side panel in position
on vehicle.
(2) Press on the side panel to seat clips.
(3) Install side panel(s) screws.
(4) Install floor console shift bezel.
(5) Install shift knob.
INSTALLATION
(1) Place front floor console side panel in position
on vehicle.
(2) Press on the side panel to seat clips.
(3) Install attaching screws.
(4) Install floor console shift bezel.
(5) Install shift knob.
DOOR SILL TRIM
REMOVAL
The door sills are attached with push pin fasteners
(1) Remove fasteners attaching door sill trim to sill
panel (Fig. 13).
(2) Remove sill trim from vehicle.
Fig. 13 DOOR SILL TRIM
1 - FASTENERS
2 - DOOR SILL TRIM
3 - DOOR OPENING SILL
INSTALLATION
(1) Place sill trim in position on vehicle.
(2) Install fasteners to attach door sill trim to sill
panel.
INTERIOR 23 - 67