Dodge Intrepid Service Manual page 997

25 - 16 EVAPORATIVE EMISSIONS
ORVR (Continued)
1 - FUEL CAP
2 - RECIRCULATION TUBE
3 - CONTROL VALVE
4 - FLOW MANAGEMENT VALVE
5 - PURGE
6 - NVLD ASSMBLY
PCV HOSE
DESCRIPTION
The PCV system has a heat exchanger in the PCV
hose that works with the cooling system of the vehi-
cle (Fig. 8) or (Fig. 9).
REMOVAL
(1) Drain the Cooling system, refer to the Cooling
system for more information.
(2) Remove hose from PCV valve.
(3) Remove hose from valve cover.
(4) Remove the 2
exchanger in PCV hose.
INSTALLATION
(1) Install heater hoses to heat exchanger and
tighten clamps.
(2) Install hose to PCV valve.
(3) Install hose to valve cover.
Fig. 7 ORVR System Schematic
heater hoses from
7 - BREATHER ELEMENT
8 - CANISTER
9 - ROLLOVER VALVE
10 - FUEL TANK
11 - CHECK VALVE
heat
Fig. 8 PCV - 2.7L
LH