Dodge Intrepid Service Manual page 798

LH
B-PILLAR LOWER TRIM
REMOVAL
(1) Remove seat belt height adjuster knob.
(2) Remove upper B-pillar trim.
(3) Remove bolt attaching seat belt to floor below
B-pillar (Fig. 4).
(4) Remove access door from above seat belt slot
on B-pillar trim.
(5) Disengage clips attaching lower trim to B-pil-
lar.
(6) Slide seat belt through the B-pillar trim.
(7) Remove B-pillar trim from vehicle.
Fig. 4 B-PILLAR LOWER AND UPPER TRIM
1 - SHOULDER HARNESS ADJUSTER
2 - UPPER B-PILLAR TRIM
3 - CLIPS
4 - LOWER B-PILLAR TRIM
5 - B-PILLAR
6 - CLIP
INSTALLATION
(1) Slide seat belt through the B-pillar trim.
(2) Place B-pillar trim in position on vehicle.
(3) Engage clips attaching lower trim to B-pillar.
(4) Install access door above seat belt slot on B-pil-
lar trim.
(5) Install bolt attaching seat belt to floor below
B-pillar.
(6) Install upper B-pillar trim.
(7) Install seat belt height adjuster knob.
(8) Refit weatherstrip.
B-PILLAR UPPER TRIM
REMOVAL
(1) Disengage shoulder belt turning loop cover.
(2) Remove bolt attaching turning loop to shoulder
belt height adjuster.
(3) Remove turning loop from adjuster.
(4) Remove adjuster knob.
(5) Disengage clips attaching upper trim to B-pil-
lar (Fig. 4).
(6) Remove B-pillar trim from vehicle.
INSTALLATION
(1) Place B-pillar trim in position on vehicle.
(2) Engage clips attaching upper trim to B-pillar.
(3) Place shoulder belt turning loop in position on
adjuster.
(4) Install bolt attaching turning loop to shoulder
belt height adjuster.
(5) Install shoulder belt turning loop cover.
(6) Refit weatherstrip.
INTERIOR 23 - 61