Dodge Intrepid Service Manual page 666

LH
INPUT CLUTCH ASSEMBLY (Continued)
Fig. 306 Input Clutch Assembly on Pressure Fixture
Tool 8391
1 - INPUT CLUTCH ASSEMBLY
2 - INPUT CLUTCH PRESSURE FIXTURE 8391
Fig. 307 Set Up Dial Indicator to Measure UD Clutch
Clearance
1 - DIAL INDICATOR
2 - UNDERDRIVE CLUTCH
Fig. 308 Press Down on UD Clutch Pack and Zero
Dial Indicator
1 - DIAL INDICATOR
2 - UNDERDRIVE CLUTCH
(19) Take average of four measurements and com-
pare with UD clutch pack clearance specification.
Underdrive clutch pack clearance must be 0.94-
1.50 mm (0.037-0.059 in.).
(20) If necessary, select the proper reaction plate
to achieve specifications:
(21) Install the OD clutch pack (four fibers/three
steels) (Fig. 309).
Fig. 309 Install OD Clutch Pack
1 - OVERDRIVE CLUTCH PACK
TRANSAXLE 21 - 119