Specifications; 42Le Automatic Transaxle - Dodge Intrepid Service Manual

LH
42LE AUTOMATIC TRANSAXLE (Continued)

SPECIFICATIONS

42LE AUTOMATIC TRANSAXLE

Transaxle Type
Lubrication Method
Cooling Method
3rd Gear (Direct)
4th Gear (Overdrive)
Reverse Gear
Description
Differential Assembly
Output Shaft
Transfer Shaft
Overall Drag at Output Hub
Description
Low/Reverse Clutch (Select
Reaction Plate)
Two/Four Clutch (No Select)
Reverse Clutch (Select Snap Ring)
Overdrive Clutch (No Select)
Underdrive Clutch (Select Reaction
Plate)
Description
Backlash
Assembly Preload
GENERAL SPECIFICATIONS
1st Gear
2nd Gear
BEARING PRELOAD (DRAG TORQUE)
Four-Speed Automatic, Longitudinally Mounted,
Electronically Controlled, Fully Adaptive, Electronically
Modulated Torque Converter, Integrated Differential with
Pump (internal - external gear-type)
Water Heat Exchanger and/or Air-to-Oil Heat
GEAR RATIOS
Metric
0.8-3.4 N·m
0.22-0.903 N·m
0.22-0.903 N·m
1.12-6.77 N·m
CLUTCH PACK
Metric
0.89-1.04 mm
0.76-2.64 mm
0.89-1.37 mm
1.07-3.25 mm
0.94-1.50 mm
DIFFERENTIAL
Metric
0.14-0.27 mm
0.8-3.4 N·m
TRANSAXLE 21 - 61
Unique Oil Sump
Exchanger
2.84:1
1.57:1
1.00:1
0.69:1
2.21:1
Standard
7-30 in. lbs.
1-8 in. lbs.
1-8 in. lbs.
10-60 in. lbs.
Standard
0.035-0.060 in.
0.030-0.104 in.
0.035-0.054 in.
0.042-0.128 in.
0.037-0.059 in.
Standard
0.0045-0.0105 in.
7-30 in. lbs.