Dodge Intrepid Service Manual page 711

21 - 164 TRANSAXLE
VALVE BODY (Continued)
(2) Install regulator valve spring retainer (Fig.
433).
Fig. 433 Install Regulator Valve Spring Retainer
using Tool 6302
1 - TOOL 6302
2 - RETAINER
(3) Install dual retainer plate using Tool 6301 (Fig.
434).
Fig. 434 Install Dual Retainer Plate using Tool 6301
1 - TOOL 6301
2 - RETAINER
(4) Verify that all retainers are installed as shown
in (Fig. 435). Retainers should be flush or below
valve body surface.
Fig. 435 Valve Retainer Location
1 - RETAINER
2 - RETAINER
(5) Install 2/4 Accumulator components as shown
in (Fig. 436). Torque 2/4 Accumulator retainer plate
to 5 N·m (45 in. lbs.).
Fig. 436 2/4 Accumulator Assembly
1 - VALVE BODY
2 - RETAINER PLATE
3 - DETENT SPRING
4 - SPRINGS
5 - SEALS
6 - PISTON
(6) Install check balls into position as shown in
(Fig. 437). If necessary, secure them with petrolatum
or transmission assembly gel for assembly ease.
LH