Dodge Intrepid Service Manual page 571

21 - 24 TRANSAXLE
42LE AUTOMATIC TRANSAXLE (Continued)
Fig. 59 Stake Grinding Pattern
1 - TRANSFER SHAFT
2 - TRANSFER SHAFT NUT
(44) Using a small chisel, carefully open stakes on
nut (Fig. 60).
Fig. 60 Opening Nut Stakes
1 - CHISEL
2 - NUT STAKE
(45) Use special tool 6497 and 6498 to remove the
transfer shaft nut or the output shaft nut (Fig. 61).
(46) Remove output shaft from case using a shop
press (Fig. 62).
Use special tool 6596 with a shop press to remove
front output shaft bearing cup (Fig. 63).
Fig. 61 Remove Output Shaft Nut
1 - SPECIAL TOOL 6497
2 - SPECIAL TOOL 6498
3 - BREAKER BAR
Fig. 62 Use Arbor Press to Remove Output Shaft
from Case
1 - OUTPUT SHAFT
2 - ARBOR PRESS
3 - TRANSAXLE CASE
LH