Dodge Intrepid Service Manual page 831

23 - 94 SEATS
REAR SEAT BACK (Continued)
Fig. 38 40 Section Pivot Pin
1 - PIN
REMOVAL - 60 SECTION
(1) Remove seat back collar assembly (Refer to 23 -
BODY/SEATS/REAR SEAT BACK COLLAR ASSEM-
BLY - REMOVAL).
(2) Remove bolt attaching 40 seat section.
(3) Remove the 40 seat section.
(4) Remove bolt attaching 60 seat section (Fig. 39).
(5) Slide seat back 60 seat section off pivot bracket
and remove from the collar assembly.
Fig. 39 REAR SEAT BACK 60 SECTION
1 - ATTACHING BOLT
REMOVAL - 60/40 SEAT COLLAR ASSEMBLY
(1) Remove rear seat cushion (Refer to 23 - BODY/
SEATS/SEAT CUSHION REAR - REMOVAL).
(2) Remove nuts attaching rear seat back collar
assembly.
(3) Remove rear seat back collar assembly.
(4) Remove the 40 seat section from the rear seat
back collar assembly.
(5) Remove the 60 seat section from the rear seat
back collar assembly (Fig. 40).
Fig. 40 REAR SEAT BACK COLLAR
1 - PIVOT BRACKET
INSTALLATION
INSTALLATION
(1) Place rear seat back in position in vehicle.
(2) Engage hooks at top of seat back.
(3) Install inboard nuts and outboard bolts attach-
ing rear seat back and belts to floor. Tighten to 40
N·m (29 ft. lbs.) torque.
(4) Install rear seat cushion (Refer to 23 - BODY/
SEATS/SEAT CUSHION - REAR - INSTALLATION).
INSTALLATION - 40 SECTION
(1) Place seat back 40 section on pin.
(2) Install bolt attaching 40 section seat back to
collar section. Tighten bolt to 16 N·m (12 ft. lbs.)
torque.
(3) Install seat back collar assembly (Refer to 23 -
BODY/SEATS/REAR
ASSEMBLY - INSTALLATION).
INSTALLATION - 60 SECTION
(1) Install the 60 seat section on pivot bracket.
(2) Install bolt attaching 60 seat section. Tighten
bolt to 16 N·m (12 ft. lbs.) torque.
(3) Install the 40 seat section on pin.
(4) Install bolt attaching 40 seat section. Tighten
bolt to 16 N·m (12 ft. lbs.) torque.
(5) Install seat back collar assembly (Refer to 23 -
BODY/SEATS/REAR SEAT BACK COLLAR ASSEM-
BLY - INSTALLATION).
SEAT BACK - COLLAR
LH