Inter-Tel CS-5200 Administrator's Manual page 256

System Features
®
INTER-TEL CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
4.
5.
To cancel Do-Not-Disturb:
To place your busy endpoint in Do-Not-Disturb while a call is camped on:
If, while on a call, you hear Call Waiting signals and you want to let the caller know you do not
want to be disturbed:
Page 238
If desired, customize the second line of the message: Use any combination of the fol-
lowing methods.
Remain in numeric mode: Press the dialpad buttons to enter the desired number.
a.
Use the pound button (
colon (:). Inter-Tel endpoint users can press the
space, or press the
MUTE
b. Change to alphanumeric mode (Inter-Tel endpoints only): Press the
ton (the button lights) or the
desired characters. Refer to the chart above. Inter-Tel endpoint users can press the
button once to advance or twice to leave a space, or press the
FWD
ton to backspace.
c. Use Speed Dial and/or redial numbers (Inter-Tel endpoints only): In either
numeric or alphanumeric mode, you can speed dial a number (using the Speed
Dial button or feature code). In numeric mode you can press the
enter the stored characters. You may chain Speed Dial and/or redial numbers
together.
Terminate programming:
Inter-Tel endpoints—Press the Speaker or the
handset. The button lights. Display endpoints show selected message. Date and
DND
time appear on the second line if there is no customized message.
Single line endpoints—Hang up.
Model 8660 or 8662: While on-hook, press the lit
and the display shows DO-NOT-DISTURB OFF.
Other Inter-Tel endpoints: While on-hook, press the lit
Cancel Do-Not-Disturb feature code (371) or Do-Not-Disturb On/Off feature code
(372). The button goes off, and the display shows DO-NOT-DISTURB OFF.
Single line endpoint: Lift the handset, enter the Cancel Do-Not-Disturb feature code
(371) or Do-Not-Disturb On/Off feature code (372), and hang up.
Inter-Tel endpoints—Press the
enter a Do-Not-Disturb feature code (370 or 372). The button lights. The display
shows DO-NOT-DISTURB ON. The intercom caller is no longer camped on and
receives Do-Not-Disturb indications.
NOTE The following procedure will interrupt the call you are on.
Single line endpoints—Hookflash/recall and enter the a Do-Not-Disturb feature code
(370 or 372). The call you are on is placed on Consultation Hold. The intercom caller
is taken off of Camp On and receives Do-Not-Disturb indications. To return to the call
you interrupted, hookflash/recall twice.
) for a hyphen (-) and the asterisk button (
#
button to backspace.
USE ALPHA MODE
ACCEPT
DND
button or press the Special button and then
DND
) for a
button once to leave a
FWD
but-
MSG
menu button, then enter the
but-
MUTE
button to
REDIAL
button, or lift and replace the
button. The button goes off,
button, or enter the
DND
Do-Not-Disturb