Inter-Tel CS-5200 Administrator's Manual page 223

INTER-TEL
Exiting and Re-Entering the Conference
To exit the conference and leave the other parties connected (any inside party) with an
Inter-Tel endpoint:
During the conference, press the
button flutters.
NOTE
To return to the conference:
Lift the handset and/or press the
To exit the conference and leave the other parties connected (any inside party) with a sin-
gle line endpoint:
During the conference, hookflash and hang up.
NOTE
Ending the Conference and Placing All Parties on Hold
To end the conference and put all parties on hold (any inside party) with an Inter-Tel
endpoint:
To end the conference and put all parties on hold (any inside party) with a single line end-
point:
Exiting and Re-Entering the Conference
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
If all remaining parties are outside parties and the Hold timer expires while you
are out of the conference, the conference recalls your endpoint. The recall rings
at your endpoint and the
shows CONFERENCE RECALLING. Press the
conference. If the recall is not answered before the Recall timer expires, it will
recall the Attendant.
If the Hold timer expires while you are out of the conference, the parties recall
your endpoint. When the recall rings at your endpoint, lift the handset to answer
the recall. If the recall is not answered before the Recall timer expires, it will recall
the Attendant.
To return to the conference: Lift the handset and/or enter the Conference feature
code (5).
During the conference, press the
Call button flutters. The parties are still connected in a conference.
To place the parties on individual hold: Press the Hold button or enter the Individual
Hold feature code (336). You can then return to each party individually by pressing the
associated Call or button.
IC
During the conference, hookflash and hang up. The parties are still connected in a con-
ference.
To place the parties on individual hold: Lift the handset and enter the Individual
Hold feature code (336). You can then return to each party individually by entering the
Individual Hold feature code again.
button and hang up. The
CNF
button flashes at the medium rate. The display
CNF
button again.
CNF
button and hang up. The
CNF
System Features
button and a Call
CNF
button to return to the
CNF
button and a
CNF
Page 205