Endpoint-To-Endpoint Calling - Inter-Tel CS-5200 Administrator's Manual

System Features
®
INTER-TEL CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
ANSWER
will appear under a Call button. In the default database, all single line endpoints have this fea-
ture enabled.
To turn ring intercom always on or off:
Handsfree Enable/Disable
An Inter-Tel endpoint user can always receive private calls by disabling the endpoint Hands-
free Answering feature using the Handsfree On/Off feature code, as described in the following
paragraph. The endpoint user hears repeating double tones when receiving an intercom call. To
answer while Handsfree Mode is disabled, the user must lift the handset or press the Speaker,
ANSWER
To enable or disable handsfree mode:

Endpoint-To-Endpoint Calling

Receiving Intercom Calls
To receive an intercom call on an Inter-Tel endpoint:
To receive an intercom call on a single line endpoint:
To receive a transferred-to-hold intercom call:.
NOTE
Page 176
button, or button. If the endpoint does not have an
IC
Inter-Tel endpoints: While on-hook, enter the Ring Intercom Always On/Off feature
code (377). The display shows RING IC ALWAYS ON (or OFF).
Single line endpoints: Lift the handset. Enter the Ring Intercom Always On/Off fea-
ture code (377).
, or button.
IC
While on-hook, enter the Handsfree On/Off feature code (319). The display shows
HANDSFREE MODE ON (or OFF).
If you hear a double tone and a call announcement (handsfree call), and the Speaker
button is lit, respond handsfree or lift the handset. (Display endpoints show
(username) to identify the source of the call.)
If you hear repeating double tones (private call), lift the handset, or press the Speaker,
, or button to respond handsfree. (Display endpoints show INTER-
ANSWER IC
COM CALL FROM <username> to identify the source of the call.)
Model 8660 or 8662: Instead of answering the call, you may press one of the fol-
lowing menu buttons:
— SEND TO V-MAIL: This option appears only if you have a Voice Mailbox.
Pressing this button sends the call directly to your mailbox greeting.
— IC CALL TO DND: Pressing this button sends Do-Not-Disturb tones to the
caller and allows you to program a Do-Not-Disturb message. If using a display
endpoint, the caller sees DO-NOT-DISTURB. For detailed instructions about
using Do-Not-Disturb, refer to
When you hear repeating double tones, lift the handset.
If the endpoint does not have an
button.
Inter-Tel endpoints: When the
play shows <calling endpoint> TFR FROM <transferring endpoint>, lift the handset
and press the button (or Call button). Or, while on-hook, press the
IC
page 235.
button, the call will appear under a Call
IC
button (or Call button) is fluttering and the dis-
IC
Handsfree Enable/Disable
button, the call
IC
TO
IC
but-
IC