Inter-Tel CS-5200 Administrator's Manual page 114

Hardware and Endpoints
®
INTER-TEL CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Table 14.
PROGRAMMABLE
BUTTONS 2–6, 14–16,
18, and 21–35
CNF
HOLD
TRANSFER
SYS SPD
REDIAL
PAGE
QUEUE
MUSIC
PAGE ZONE 1
STN SPEED DIAL
FWD
SPECIAL
ANSWER
OUTGOING
SPEAKER
MSG
MUTE
DATA
STATION SPEED
DIAL BUTTONS 0–9
UNDEFINED
Keymaps
A keymap group determines the layout of the buttons for all the phones assigned to that group.
If any of the buttons in the keymap group are user-programmable or undefined, they can be
changed by the phone user. Up to 250 different keymap groups can exist. Each node contains
its own keymap programming.
Each Inter-Tel phone is assigned a standard keymap and can also have an alternate keymap.
For information about switching between standard and alternate keymaps, refer to
When the system is in the default state all phones are assigned to default Keymap 01. There are
no individual preprogrammed keymaps for each of the specific phone types. And, the default
Speaker,
As part of the installation procedure, the installer must make sure the buttons are labeled to
match their functions.
Page 96
Feature Buttons(Continued)
BUTTON
Undefined values. Can be programmed with any feature code, trunk
access code, or extension number, or can be programmed as an
endpoint extension or System Speed Dial bin.
Programmable Button 7: Conference (5)
Programmable Button 8: Individual Hold (336)
Programmable Button 9: Transfer to Ring (345)
Programmable Button 10: System Speed Dial (381)
Programmable Button 11: Redial (380)
Programmable Button 12: Page (7)
Programmable Button 13: Queue Request (6)
Programmable Button 17: Background Music (313)
Programmable Button 19: Selects Page Zone 1 for making a page.
Programmable Button 20: Station Speed Dial (382)
Call Forward All Calls (355) Also used for canceling Call Forward.
Signals the system to expect a feature code.
Answer (351)
Selects a trunk for placing an outgoing call using the phone's Outgo-
ing Call feature (8).
Speakerphone On/Off
Message (365) – Also retrieves messages when the flashing MSG
button is pressed.
Microphone Mute On/Off (314). This is a fixed-function button on
digital
phones
Data (340)
Used for storing and dialing one Station Speed Dial number each.
Some phones may have several undefined buttons that can be pro-
grammed as desired.
, and buttons are not programmable.
MSG MUTE
FUNCTION
page 169.
Keymaps