Inter-Tel CS-5200 Administrator's Manual page 177

INTER-TEL
Table 25.
COS
02
03
04
05
06
07
08
09
Class of Service
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Class of Service Default Values(Continued)
NAME
Deny Area/ This restriction is divided into eight user groups to allow the use of
Office varying area/office code restriction tables. This is useful for reduc-
ing restrictions for some of the endpoints, applications, or trunk
groups while increasing restrictions for others. Each endpoint,
application, and trunk group is assigned a day mode and a night
mode user group in Database Programming. Within each user
group, area codes can be designated as restricted, allowed, or
extended. Restricting an area code prevents users from placing
calls to that area code. Allowing an area code allows all office
codes within that area code. Designating an area code as
extended allows the programmer to determine which office codes
(up to 800) are allowed or restricted within that area code.
Deny Calls to operator numbers are restricted.
Operator
Deny Toll Calls to numbers containing a toll string (defaults to 1) are
Access restricted.
Deny Calls to international numbers are restricted.
International
Deny Equal Calls that begin with equal access digits (10XXX or 101XXXX) are
Access restricted.
Deny Local Calls to local numbers are restricted.
Calls
Denied Calls to programmed "denied" numbers (defaults to
Numbers 1900NXXXXXX+ and 976XXXX+) are restricted.
Allowed Calls to programmed "allowed" numbers (defaults to
Numbers 1800NXXXXXX+) are allowed, even if number also matches a dial
pattern in a restricted class of service that is assigned to the end-
point, application, or trunk group being used.
System Features
RESTRICTION
Page 159