House Phone Mode Interactions; Redial - Inter-Tel CS-5200 Administrator's Manual

INTER-TEL
The interaction of the House Phone Mode flag with the programmed Speed Dial number and
system feature is shown in Table 31.
Table 31.
House phone user
lifts the handset
House phone user
lifts the handset
House phone user
lifts the handset
House phone is con-
nected to ARS, and
the user performs a
hookflash
House phone is con-
nected to an outside
call, and the user
performs a hookflash
Party the house
phone is connected
to hangs up before
the house phone
user

Redial

The Redial feature can store one phone number in Redial memory of the endpoint. If the end-
point user reaches a busy number, is disconnected, or receives no answer, the number can be
readily redialed. To redial, the user lifts the handset and presses the
Redial feature code (380). A trunk access code is automatically entered and the phone number
is redialed.
If redialing is activated while still connected to an outside call, the connection is dropped and
the trunk is reseized before the number is dialed.
Only one phone number can be stored in an endpoint's Redial memory at a time. This number
can be stored in either of the following ways, depending on endpoint programming:
•
•
The Last Number Saved and Last Number Dialed features work differently depending on the
station status when it is used, as shown in Individual endpoint programming determines the
mode of the Redial feature, either Last Number Dialed or Last Number Saved. The Redial fea-
ture code (380) performs the Redial function and is programmed under the
Redial
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005

House Phone Mode Interactions

DAY/NIGHT
SITUATION
NUMBER
Complete exten-
sion
Blank
Incomplete
extension num-
ber
Dials an outside
number using
ARS
N/A
N/A
Last Number Saved: The desired number is manually stored in Redial memory by the
station user. Dialing other numbers does not change the stored number. It only changes
when a new number is stored.
Last Number Dialed: The last number manually dialed or speed dialed is automati-
cally stored. It changes every time the user dials a phone number. Last Number Dialed
is the default state of the Redial feature.
NORMAL MODE
Dials the extension Dials the extension num-
number ber
User receives intercom User receives reorder
dial tone tone
System dials the par- System dials partial num-
tial number and waits ber, then times out after
for further digits Long Interdigit timer
expires, and sends reor-
der tones
System inserts a hook- System restarts ARS by
flash in the number clearing the number and
and registers end-of- returns outside dial tone
dialing to the user
The call is placed on The trunk dials a hook-
consultation hold, and flash, and toll restriction
the user hears inter- is restarted
com dial tone
User receives intercom System redials the house
dial tone and can use phone digits after the SL
another feature code Wait for Disconnect timer
or dial a number expires
REDIAL
System Features
RESTRICTED MODE
button or enters the
button.
REDIAL
Page 231