Inter-Tel CS-5200 Administrator's Manual page 144

System Features
®
INTER-TEL CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Table 20.
Diagnostics On/Off
Enable Network Day
Enable Network Night
Modem Disable
Modem Enable
Modem Reset
Night Ring On/Off
Periodic Diagnostics
On/Off
Program System Speed
Dial
Set Network Date/Time
Set Time/Date
Page 126
Administrator Feature Code Definitions(Continued)
FEATURE NAME
(US/EUROPE)
CODE
9900/9100 Enables or disables system diagnostics
mode to perform diagnostics functions such
as freezing/unfreezing the database, print-
ing message logs, and seizing a device for
troubleshooting purposes.
NOTE:
Because diagnostics mode affects
system performance, it is recommended that
you run the diagnostics program when the
system is idle.
9862 Places any or all remote nodes into day
mode (you are prompted for the node num-
ber).
9861 Places any or all remote nodes into night
mode (you are prompted for the node num-
ber).
9867 Disables the internal modem; used in con-
junction with the assigned extension num-
ber of the modem.
9866 Enables the internal modem; used in con-
junction with the assigned extension num-
ber of the modem.
9869 Resets the internal modem; used when the
modem fails to answer an incoming call or
to synchronize with an external modem.
CAUTION: Database corruption could occur
if the modem is reset during a database
programming session. Inter-Tel recom-
mends that you assign the modem exten-
sion to a Speed Dial button.
9860 Places system in night mode or cancels
night mode. While in night mode, the night
toll and trunk restriction lists are used.
9825 Periodic diagnostics extends and improves
the functionality and checks and reconcilia-
tions performed on various resources in the
system.
9801 Programs system-wide Speed Dial numbers
when followed by location codes (000–999).
9810 Programs the time and date for all nodes in
the system. (Local time and date can also
be reset by individual nodes.)
9800 Programs system time and date
DEFINITION
Administrator Feature Codes