Speaker Buttons; Hold Buttons; Dialpad "Hot" Buttons Vs. "Spcl Key Required For Feature Code Entry" Flag - Inter-Tel CS-5200 Administrator's Manual

System Features
®
INTER-TEL CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005

Speaker Buttons

On all Inter-Tel endpoints (except the Model 8000 Series endpoints) handsfree mode is con-
trolled by a Speaker (
illustration of a speaker ( ) represents the

Hold Buttons

On all Inter-Tel endpoints (except the Model 8000 Series endpoints) the Hold feature is con-
trolled by a Hold (
international hold illustration ( ) represents the

Dialpad "Hot" Buttons vs. "SPCL Key Required for Feature Code Entry" Flag

Unless programmed to use the
points have dialpad "hot" buttons that allow dialing of feature codes, extension numbers, and
trunk access codes without pressing the
pad digit is pressed, the digit is recognized by the system.
There is a system-wide option called "SPCL Key Required for Feature Code Entry" that, if
enabled, requires Inter-Tel endpoint users to always press the
feature code.
Regardless of programming, if an Inter-Tel endpoint user presses the
hook, the display shows ENTER FEATURE CODE, and the Executive Display, Professional
Display, or Model 8560 endpoint menu shows a list of feature codes. The user can enter the
desired code or press a menu button.
Feature Codes
Each of the endpoint features is assigned a feature code. Using the endpoint's dialpad, these
codes are entered to select trunks, process calls, and use special features. Complete explana-
tions of the features and instructions for using them begin on the next page.
The codes shown on the following pages are the values that are assigned when the system is in
the default state. If desired, they can be changed in Database Programming to any one- to five-
digit value.
NOTE
Page 118
) button.
SPKR
) button. On Models 8600, 8620/8622, 8660, or 8662 endpoints, the
HOLD
Special
Changing a feature code may affect the accessibility of other features.
On the Model 8600, 8620, 8660, or 8662 endpoint, an
Speaker button.
button.
Hold
button when entering a feature code, all Inter-Tel end-
Special button or lifting the handset. As soon as a dial-
Special button before entering a
button while on-
Special
Speaker Buttons