Digital Endpoints - Inter-Tel CS-5200 Administrator's Manual

INTER-TEL
To connect a headset to all other Inter-Tel phones:
1.
2.
3.
Disconnecting a Headset
The following procedures describe how to disconnect a headset from an Inter-Tel phone.
To disconnect the headset from a Model 8620 or 8660 IP or a Model 8520 or 8560 digital
phone:
1.
2.
To disconnect the headset from all other Inter-Tel phones:
1.
2.
3.

Digital Endpoints

With the addition of Digital Expansion Interface (DEI) equipment and appropriate licensing,
the Inter-Tel 5000 Network Communications Solutions platform supports the following digital
phones and endpoints.
•
•
•
•
•
Disconnecting a Headset
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Remove the coiled handset cord from the base of the phone. Leave the handset in the
cradle.
Insert the headset plug into the vacant handset jack.
While on-hook, enter the Headset On feature code (315) or the Headset On/Off feature
code (317). The display shows HEADSET MODE ON.
Unplug the headset cord from the back of the phone.
While on-hook, enter the Headset Off feature code (316) or the Headset On/Off feature
code (317). The display shows HEADSET MODE OFF.
Unplug the headset cord from the base of the phone.
Plug the coiled handset cord into the base of the phone.
While on-hook, enter the Headset Off feature code (316) or the Headset On/Off feature
code (317). The display shows HEADSET MODE OFF.
Hard Digital Phones
— Model 8500
— Model 8520, Two-Line Display
— Model 8560, Six-Line Display
— Associate
— Standard
— Executive
— Professional
®
— Axxess Basic
™
— Eclipse Basic
Single-Line Adapter (SLA)
Single Line Phones
Modem Data Port Module (MDPM)
Personal Computer Data Port Module (PCDPM), audio only
Hardware and Endpoints
Page 101