Inter-Tel CS-5200 Administrator's Manual page 143

INTER-TEL
Table 19.
Station Monitor
Station Speed Dial
Station Speed Dial Programming
Steal
Switch Keymap
System Forward Enable
System Forward Disable
System Forward On/Off
System Speed Dial
Transfer to Hold
Transfer to Ring
Administrator Feature Codes
The following feature codes may be used only at designated Administrator endpoints. Non-
Administrator endpoint users hear reorder tones if they attempt to use these feature codes.
Table 20.
Clear Network Alarm
Clear System Alarm
Administrator Feature Codes
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Endpoint Feature Code Definitions(Continued)
FEATURE NAME
Administrator Feature Code Definitions
FEATURE NAME
(US/EUROPE)
CODE
321 (Hunt Group supervisors only) Allows a desig-
nated hunt group supervisor to monitor a call
of anyone in the associated hunt group.
382 Dials/programs one of the 10 Station Speed
383 Dial numbers when followed by a location
code (0–9). Inter-Tel endpoints use the Station
Speed Dial button plus a location code for pro-
gramming and dialing, or they can program
Speed Dial buttons for one-button dialing.
387 Allows the supervisor to take away a call from
the hunt group member/agent.
399 (Not used on single line endpoints) This
allows an endpoint user to switch between
standard and alternate keymaps.
352 Enables or disables the database-pro-
353 grammed System Forwarding feature for this
354 endpoint. The on/off feature code can be used
to toggle the feature on or off.
381 Dials one of the 1000 System Speed Dial
phone numbers when followed by a location
code (000–999). Also used for reviewing Sys-
tem Speed Dial numbers.
346 Transfers a call to another endpoint and
places it on individual hold so that it does not
ring or send call waiting signals until it recalls.
345 Transfers a call to another endpoint or to an
outside phone number.
CODE
9851 Clears network-wide alarms on every node
in the network, but will not affect system
alarms. The Clear Network Alarm feature
code may be entered on any node in the
network, but the Send Network Alarms flag
must be set for the administrator to clear
alarms on other nodes in the network.
9850 Clears all local and network-wide system
alarm displays on your node.
System Features
DEFINITION
DEFINITION
Page 125