Diagnostics Feature Code Definitions - Inter-Tel CS-5200 Administrator's Manual

System Features
®
INTER-TEL CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Table 21.
Diagnostic - Print
Message Log
Diagnostic - Print
Network Log
Diagnostic - Query Node
Traffic
Diagnostic - Show
Version
Diagnostic - SIP View
Diagnostic - Spare 1-3
Diagnostic - System
History
Diagnostic - View
Displays
Program Database
Seize Device
System History — Freeze
System History —
Unfreeze
Page 130
Diagnostics Feature Code Definitions(Continued)
FEATURE NAME
(US/EUROPE)
9910–9912/
CODE
9975/9175 (Not Programmable) Sends a report to a des-
ignated printer or file that lists system error
messages to be used for troubleshooting pur-
poses.
9976/9176 This feature code prints the network log to
message print. This feature is useful in deter-
mining the system of a networked system.
9978/9178 Using this feature code you can query the
status of various devices on the system
based on the status of the traffic flags in Data-
base Programming. The output is sent to
Message Print.
9928/9128 To check the call processing software version
at an administrator's endpoint, you can enable
diagnostics mode, then enter this feature
code to view the version and date of the call
processing software.
However, feature code 9928 displays the firm-
ware version of the endpoint if it is in SIP
mode.
9987/9187 Allows the user to change the system wide
SIP output value. Options include No Output,
Headers and Full Output.
This is used by Inter-Tel software developers
9110–9112 and cannot be used in Beta or Production
software.
9974/9174 This is used by Inter-Tel software developers
and cannot be used in Beta or Production
software.
9983/9183 This is used by Inter-Tel software developers
and cannot be used in Beta or Production
software.
9932/9132 Can be used for programming endpoint, sys-
tem, and trunk parameters.
9973/9173 Used during troubleshooting to seize a spe-
cific trunk or endpoint by indicating the board
number, port number, and device number.
9993/9193 The system fault history can be halted (fro-
zen) or re-enabled using these feature codes
9998/9198 when diagnostics mode is enabled. Fault his-
tory is used by service personnel when trou-
bleshooting the system
DEFINITION
Diagnostics Feature Codes