Synchronize Network Time; Diagnostics Feature Codes - Inter-Tel CS-5200 Administrator's Manual

INTER-TEL
Table 20.

Synchronize Network Time

Diagnostics Feature Codes

The Diagnostics Mode feature code (9900 in the US/9100 in Europe) must be entered at the
Administrator's phone to enable system diagnostic mode before the following feature codes
can be used.
Table 21.
FEATURE NAME
Compression On/Off
Compression Statistics
Diagnostic - ASAI Snoop
Off
Diagnostic –
ASAI Snoop On
Diagnostic –
Dump Extension
Diagnostics Feature Codes
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Administrator Feature Code Definitions(Continued)
FEATURE NAME
(US/EUROPE)
Diagnostics Feature Code Definitions
(US/EUROPE)
9982/9182
9981/9181
9926/9126
9927/9127
9922/9122
CODE
9811 Synchronizes the minutes past the hour
across the network.
NOTE: If a node's time is off by more than
30 minutes, synchronizing the minutes may
cause the hour to change. Also, network
time is automatically synchronized every
day at 12:30 AM (00:30), using the time set-
ting on the node with the lowest number.
CODE
Compresses call processing messages sent
to Database Programming, speeding up
transfers. You should not disable this feature
unless instructed to do so by Inter-Tel person-
nel.
Dumps various statistics related to the Data-
base Programming compression algorithm.
This feature should be used only when
directed to do so by Inter-Tel personnel.
This feature code turns off the ASAI output to
Message Print. ASAI is the protocol the sys-
tem uses to talk to Database Programming
and the AVDAP. Turning this feature on helps
the Inter-Tel Engineers debug the messaging
between Call Processing and Database Pro-
gramming or Call Processing and the AVDAP.
This feature code turns on the ASAI output to
Message Print. ASAI is the protocol the sys-
tem uses to talk to Database Programming
and the voice processing system. Turning this
feature on helps the Inter-Tel Engineers
debug the messaging between Call Process-
ing and Database Programming or Call Pro-
cessing and the AVDAP.
Allows an Inter-Tel field technician to dump a
device or structure when debugging a prob-
lem. The system dumps the internal data
structures for that extension to message print.
If you press the pound button (#) you are
prompted for a command. The command
allows you to enter an alphanumeric string of
the structure to dump.
System Features
DEFINITION
DEFINITION
Page 127