The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
enable password encryption
disable password encryption
create account
config account
show account
delete account
show session
show switch
show serial_port
config serial_port
enable clipaging
disable clipaging
enable telnet
disable telnet
telnet
enable web
disable web
save
reboot
reboot
reset
reset
reset
login
logout
Each command is listed, in detail, in the following sections.
enable/disable password encryption
Purpose
Syntax
Description
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Parameters
[admin | operator | user] <username 15>
<username 15>>
[<username 15> | <username 15> force_agree]
{baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}
<tcp_port_number 1-65535>
<ipaddr> {tcp_port <value 0-65535>}
<tcp_port_number 1-65535>
force_agree
{[config | system]}
{[config force_agree | system force_agree]}
{ system exclude [vlan | system] }
Used to enable or disable password encryption on user accounts
enable password encryption
disable password encryption
The user account configuration information will be stored in the
configuration file, and can be applied to the system. If password
B
ASIC
{encrypt [plain_text| sha_1] <password>}
{encrypt [plain_text| sha_1] <password>}
9
S
C
WITCH
OMMANDS
4