D-Link xStack DES-3500 Series Manual page 299

DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3526:admin#show lldp ports 1
Command: show lldp ports 1
Port ID
----------------------------------------------------------------------
Admin Status
Notification Status
Advertised TLVs Option
Port Description
System Name
System Description
System Capabilities
Enabled Management Address
(NONE)
Port VLAN ID
Enabled VLAN Name
(NONE)
Enabled protocol_identity
(NONE)
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
DES-3526:admin#
show lldp local_ports
Purpose Used to display the per-port information currently available for populating
outbound LLDP advertisements.
Syntax show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
Description This command displays the per-port information currently available for
populating outbound LLDP advertisements.
Parameters portlist - Specified a range of ports to be configured. (UnitID:port
number). When a port list is not specified, information for all ports will be
displayed.
brief - Display the information in brief mode.
normal - Display the information in normal mode. This is the default
display mode.
detailed - Display the information in detailed mode.
Restrictions None.
: 1
: TX_and_RX
: Disable
:
295
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable