D-Link xStack DES-3500 Series Manual page 286

enable lldp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable LLDP:
DES-3526:admin#enable lldp
Command: enable lldp
Success.
DES-3526:admin#
disable lldp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable LLDP:
DES-3526:admin#disable lldp
Command: disable lldp
Success.
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to enable LLDP operations on the switch.
enable lldp
This is a global control for the LLDP function.
When this function is enabled, the switch can start to transmit LLDP
packets and receive and process the LLDP packets.
The specific function of each port will depend on the per port LLDP
setting. For the advertisement of LLDP packets, the switch announces
the information to its neighbor through ports. For the receiving of LLDP
packets, the switch will learn the information from the LLDP packets
advertised from the neighbor in the neighbor table.
The default state for LLDP is disabled.
None.
Only Administrator or Operator – level users can issue this command.
Used to disable LLDP operation on the switch.
disable lldp
The switch will stop sending and receiving of LLDP advertisement
packets.
None.
Only Administrator or Operator – level users can issue this command.
282