D-Link xStack DES-3500 Series Manual page 185

Xstack des-3500 series layer 2 managed stackable fast ethernet switch
Hide thumbs Also See for xStack DES-3500 Series:
Table of Contents

Advertisement

show radius
Restrictions
Example usage:
To display RADIUS settings on the Switch:
DES-3526:admin#show radius
Command: show radius
Index
IP Address
-----
-------------
1
10.1.1.1
2
20.1.1.1
3
30.1.1.1
Total Entries : 3
DES-3526:admin#
create 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure a previously created VLAN as a 802.1x Guest VLAN for the Switch.
DES-3526:admin#create 802.1x guest_vlan Trinity
Command: create 802.1x guest_vlan Trinity
Success.
DES-3526:admin#
config 802.1x guest_vlan ports
Purpose
Syntax
Description
Parameters
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
None.
Auth-Port
Number
---------
1812
1800
1812
Used to configure a pre-existing VLAN as a 802.1x Guest VLAN.
create 802.1x guest_vlan <vlan_name 32>
The create 802.1x guest_vlan command is used to configure a pre-
defined VLAN as a 802.1x Guest VLAN. Guest 802.1X VLAN clients
are those who have not been authorized for 802.1x or they haven't
yet installed the necessary 802.1x software, yet would still like
limited access rights on the Switch.
<vlan_name 32> - Enter an alphanumeric string of no more than 32
characters to define a pre-existing VLAN as a 802.1x Guest VLAN.
This VLAN must have first been created with the create vlan
command mentioned earlier in this manual.
User Account Command Level – Administrator and Operator
This VLAN is only supported for port-based 802.1x and must have
already been previously created using the create vlan command.
Only one VLAN can be set as the 802.1x Guest VLAN.
Used to configure ports for a pre-existing 802.1x guest VLAN.
config 802.1x guest_vlan ports [<portlist> | all] state [enable | disable]
The config 802.1x guest_vlan ports command is used to configure ports to
be enabled or disabled for the 802.1x guest VLAN.
<portlist> - Specify a port or range of ports to be configured for the 802.1x
Acct-Port
Status
Number
---------
-----------
1813
Active
1813
Active
1813
Active
181
Key
---------
switch
des3226
dlink

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack des-3526Xstack des-3526dcXstack des-3550

Table of Contents