D-Link xStack DES-3500 Series Manual page 27

show greeting_message
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the currently configured greeting message:
DES-3526:admin#show greeting_message
Command: show greeting_message
=========================================================================
Copyright(C) 2004-2005 D-Link Corporation. All rights reserved.
=========================================================================
DES-3526:admin#
enable greeting_message
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable viewing of the currently configured greeting message:
DES-3526:admin#enable greeting_message
Command: enable greeting_message
Success.
DES-3526:admin#
disable greeting_message
Purpose
Syntax
Description
Parameters
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to view the currently configured greeting message
configured on the Switch.
show greeting_message
This command is used to view the currently configured greeting
message on the Switch.
None.
None.
DES-3526 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 5.01.B41
Used to enable viewing of the currently configured greeting
message configured on the Switch.
enable greeting_message
This command is used to enable viewing the currently configured
greeting message on the Switch.
None.
None.
Used to disable viewing of the currently configured greeting
message configured on the Switch.
disable greeting_message
This command is used to disable viewing the currently
configured greeting message on the Switch.
None.
23