D-Link xStack DES-3500 Series Manual page 176

enable 802.1x
Parameters
Restrictions
Example usage:
To enable 802.1x switch wide:
disable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable 802.1x on the Switch:
DES-3526:admin#disable 802.1x
Command: disable 802.1x
Success.
DES-3526:admin#
show 802.1x auth_configuration
Purpose
Syntax
Description
Parameters
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
None.
Only Administrator and Operator-level users can issue this command.
DES-3526:admin#enable 802.1x
Command: enable 802.1x
Success.
DES-3526:admin#
Used to disable the 802.1x server on the Switch.
disable 802.1x
The disable 802.1x command is used to disable the 802.1x Network
Access control server application on the Switch. To select between port-
based or MAC-based, use the config 802.1x auth_mode command.
None.
Only Administrator and Operator-level users can issue this command.
Used to display the current configuration of the 802.1x server on the
Switch.
show 802.1x auth_configuration {ports <portlist>}
The show 802.1x user command is used to display the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
ports <portlist> − Specifies a port or range of ports to view.
The following details are displayed:
802.1x Enabled / Disabled − Shows the current status of 802.1x
functions on the Switch.
Authentication Mode – Shows the authentication mode, whether it be
by MAC address or by port.
Authentication Protocol: Radius_Eap − Shows the authentication
protocol suite in use between the Switch and a RADIUS server. May
read Radius_Eap or Radius_Pap.
Port number − Shows the physical port number on the Switch.
172