D-Link xStack DES-3500 Series Manual page 81

Command
show stp instance
show stp mst_config id
Each command is listed, in detail, in the following sections.
enable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable STP, globally, on the Switch:
DES-3526:admin#enable stp
Command: enable stp
Success.
DES-3526:admin#
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:
DES-3526:admin#disable stp
Command: disable stp
Success.
DES-3526:admin#
config stp version
Purpose
Syntax
Description
Parameters
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Parameters
{<value 0-4>}
Used to globally enable STP on the Switch.
enable stp
This command allows the Spanning Tree Protocol to be globally
enabled on the Switch.
None.
Only Administrator and Operator-level users can issue this
command.
Used to globally disable STP on the Switch.
disable stp
This command allows the Spanning Tree Protocol to be globally
disabled on the Switch.
None.
Only Administrator and Operator-level users can issue this
command.
Used to globally set the version of STP on the Switch.
config stp version [mstp | rstp | stp]
This command allows the user to choose the version of the spanning tree
to be implemented on the Switch.
mstp – Selecting this parameter will set the Multiple Spanning Tree
77