D-Link xStack DES-3500 Series Manual page 294

config lldp dot1_tlv_vlan_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the VLAN name TLV from the outbound LLDP advertisements for all ports:
DES-3526:admin#config lldp ports all dot1_tlv_vlan_name
vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_vlan_name vlanid 1-
3 enable
Success.
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to configure an individual port or group of ports to exclude one or
more of the IEEE 802.1 Organizational VLAN name TLV data types from
outbound LLDP advertisements.
config lldp ports [<portlist>|all] dot1_tlv_vlan_name [vlan [all |
<vlan_name 32> ] | vlanid <vidlist> ] [enable | disable]
This TLV optional data type indicates whether the corresponding Local
System's VLAN name instance will be transmitted on the port. If a port is
associated with multiple VLANs those enabled VLAN IDs will be
advertised.
portlist - Specified a range of ports to be configured. (UnitID:port
number).
all - To set all ports in the system, you may use the "all" parameter.
dot1_tlv_vlan_name - This TLV optional data type indicates whether the
corresponding Local System's VLAN name instance will be transmitted
on the port. If a port is associated with multiple VLANs those enabled
VLAN IDs will be advertised. The default state is disable.
Only Administrator or Operator – level users can issue this command.
290