D-Link xStack DES-3500 Series Manual page 19

enable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
disable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
enable telnet
Purpose
Syntax
Description
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to pause the scrolling of the console screen when a command
displays more than one page.
enable clipaging
This command is used when issuing a command which causes the
console screen to rapidly scroll through several pages. This
command will cause the console to pause at the end of each page.
The default setting is enabled.
None.
Only Administrator and Operator-level users can issue this
command.
DES-3526:admin#enable clipaging
Command: enable clipaging
Success.
DES-3526:admin#
Used to disable the pausing of the console screen scrolling at the
end of each page when a command displays more than one screen
of information.
disable clipaging
This command is used to disable the pausing of the console screen
at the end of each page when a command would display more than
one screen of information.
None.
Only Administrator and Operator-level users can issue this
command.
DES-3526:admin#disable clipaging
Command: disable clipaging
Success.
DES-3526:admin#
Used to enable communication with and management of the Switch
using the Telnet protocol.
enable telnet <tcp_port_number 1-65535>
This command is used to enable the Telnet protocol on the Switch.
The user can specify the TCP or UDP port number the Switch will
use to listen for Telnet requests.
15