D-Link xStack DES-3500 Series Manual page 15

config account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the user password of "dlink" account:
show account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Success.
DES-3526:admin#
NOTICE: In case of lost passwords or password corruption, please refer to the
D-Link website and the White Paper entitled "Password Recovery Procedure",
which will guide you through the steps necessary to resolve this issue.
Used to configure user accounts
config account <username>
<password>}
The config account command configures a user account that has
been created using the create account command.
<username>
plain_text - Select to specify the password in plain text form.
sha_1 - Select to specify the password in the SHA-I enacrpted
form.
Password - The password for the user account.
The length for of password in plain-text form and in encrypted form
are different. For the plain-text form, passwords must have a
minimum of 0 character and can have a maximum of 15
characters. For the encrypted form password, the length is fixed to
35 bytes long.
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
DES-3526:admin#config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for
confirmation:****
Success.
DES-3526:admin#
Used to display user accounts.
show account
Displays all user accounts created on the Switch. Up to 8 user
accounts can exist at one time.
None.
Only Administrator-level users can issue this command.
{encrypt [plain_text| sha_1]
11