D-Link xStack DES-3500 Series Manual page 77

show syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show Syslog host information:
DES-3526:admin#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id
-------
1
2
3
Total Entries : 3
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to display the syslog hosts currently configured on the Switch.
show syslog host {<index 1-4>}
The show syslog host command is used to display the syslog
hosts that are currently configured on the Switch.
<index 1-4> − Specifies that the command will be applied to an
index of hosts. There are four available indexes, numbered 1
through 4.
None.
Host IP Address
---------------
10.1.1.2
10.40.2.3
10.21.13.1
Severity Facility
------------ --------
All Local0
All Local0
All Local0
73
UDP port Status
-------- --------
514 Disabled
514 Disabled
514 Disabled