D-Link xStack DES-3500 Series Manual page 254

config authen parameter response_timeout
Description
Parameters
Restrictions
Example usage:
To configure the response timeout for 60 seconds:
config authen parameter attempt
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the maximum number of authentication attempts at 5:
show authen parameter
Purpose
Syntax
Description
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
This command will set the time the Switch will wait for a response of
authentication from the user.
response_timeout <int 0-255> - Set the time, in seconds, the Switch
will wait for a response of authentication from the user attempting to
log in from the command line interface or telnet interface. 0 means
there won't be a time-out. The default value is 0 seconds.
User Account Command Level – Administrator.
DES-3526:admin# config authen parameter
response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DES-3526:admin#
Used to configure the maximum number of times the Switch will
accept authentication attempts.
config authen parameter attempt <int 1-255>
This command will configure the maximum number of times the
Switch will accept authentication attempts. Users failing to be
authenticated after the set amount of attempts will be denied
access to the Switch and will be locked out of further authentication
attempts. Command line interface users will have to wait 60
seconds before another authentication attempt. Telnet users will be
disconnected from the Switch.
parameter attempt <int 1-255> - Set the maximum number of
attempts the user may try to become authenticated by the Switch,
before being locked out. The default setting is 3.
User Account Command Level – Administrator.
DES-3526:admin# config authen parameter
attempt 5
Command: config authen parameter attempt 5
Success.
DES-3526:admin#
Used to display the authentication parameters currently configured
on the Switch.
show authen parameter
This command will display the authentication parameters currently
configured on the Switch, including the response timeout and user
250