D-Link xStack DES-3500 Series Manual page 156

disable igmp_snooping
Parameters
Restrictions
Example usage:
To disable IGMP snooping on the Switch:
DES-3526:admin#disable igmp_snooping
Command: disable igmp_snooping
Success.
DES-3526:admin#
Example usage:
To disable forwarding all multicast traffic to a multicast-enabled router:
show igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show IGMP snooping:
DES-3526:admin#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State
Multicast router Only
VLAN
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Host Timeout
Route Timeout
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
traffic to flood within a given IP interface.
forward_mcrouter_only – Adding this parameter to this command will
disable forwarding all multicast traffic to a multicast-enabled routers.
The Switch will then forward all multicast traffic to any IP router.
Entering this command without the parameter will disable igmp
snooping on the Switch.
Only Administrator and Operator-level users can issue this
command.
DES-3526:admin#disable igmp_snooping
forward_mcrouter_only
Command: disable igmp_snooping forward_mcrouter_only
Success.
DES-3526:admin#
Used to show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32>}
This command will display the current IGMP snooping configuration
on the Switch.
<vlan_name 32> − The name of the VLAN for which to view the IGMP
snooping configuration.
None.
Name
: Disabled
: Disabled
: default
: 125
: 10
: 2
: 1
: 260
: 260
152