D-Link xStack DES-3500 Series Manual page 55

config snmp system_contact
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch contact to "MIS Department II":
config snmp system_location
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch location for "
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3526:admin#disable snmp authenticate
traps
Command: disable snmp authenticate traps
Success.
DES-3526:admin#
Used to enter the name of a contact person who is responsible for
the Switch.
config snmp system_contact{<sw_contact>}
The config snmp system_contact command is used to enter the
name and/or other information to identify a contact person who is
responsible for the Switch. A maximum of 255 character can be
used.
<sw_contact> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no contact.
Only Administrator and Operator-level users can issue this
command.
DES-3526:admin#config snmp system_contact MIS
Department II
Command: config snmp system_contact MIS Department
II
Success.
DES-3526:admin#
Used to enter a description of the location of the Switch.
config snmp system_location {<sw_location>}
The config snmp system_location command is used to enter a
description of the location of the Switch. A maximum of 255
characters can be used.
<sw_location> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no location desired.
Only Administrator and Operator-level users can issue this command.
H Q 5 F
":
51