D-Link xStack DES-3500 Series Manual page 70

To display the switch history log:
DES-3526:admin#show log index 5
Command: show log index 5
DES-3526:admin#show log index 5
Command: show log index 5
Index Time
----- -------------------
5 00000 days 00:00:47
(Username: Anonymous, IP: 0.0.0.0, MAC: 00-00-00-00-00-00)
4 00000 days 00:00:46
(Username, IP: 0.0.0.0, MAC: 00-00-00-00-00-00)
3 00000 days 00:00:46
2 00000 days 00:00:46
1 00000 days 01:08:12
console (Username: Anonymous)
DES-3526:admin#
enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the syslog function on the Switch:
DES-3526:admin#enable syslog
Command: enable syslog
Success.
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Log Text
-------------------------------------------
Firmware upgraded to SLAVE unsuccessfully!
Log message upload was unsuccessful!
BPDU Loop Back on port 0
System warm start
Configuration and log saved to flash by
NOTE: For detailed information regarding Log entries that will appear in
this window, please refer to Appendix C at the back of the xStack DES-
3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User
Manual.
Used to enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent to
a remote host.
None.
Only Administrator and Operator-level users can issue this
command.
66