The Technical Support commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
show tech_support
Each command is listed, in detail, in the following sections.
show tech_support
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config ARP Spoofing Prevention:
DES-3526:admin#show tech_support
Command: show tech_support
=================================================================
=================================================================
Basic System Information
------------------------------------------------------
[System Time 1728ms]
System Uptime
Current Time
[Device Information 1748ms]
Device Type
MAC Address
IP Address
VLAN Name
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Parameters
Used to show the information for technical support.
show tech_support
This command is especially used by the technical support personnel to
dump the device's overall operation information. The information is
project dependent and includes the following information.
Basic System information
system log
Running configuration
Layer 1 information
Layer 2 information
Layer 3 information
Application
OS status
Controller's status
None.
Only Administrator or Operator – level users can issue this command.
DES-3526 Fast Ethernet Switch
Technique Information Report
: 0 Days 00:05:38
:
: DES-3526 Fast-Ethernet Switch
: 00-15-E9-41-5A-B9
: 10.73.21.51 (Manual)
: default
T
S
ECHNICAL
315
C
UPPORT
OMMANDS
45