D-Link xStack DES-3500 Series Manual page 155

Xstack des-3500 series layer 2 managed stackable fast ethernet switch
Hide thumbs Also See for xStack DES-3500 Series:
Table of Contents

Advertisement

config router_ports_forbidden
Description
Parameters
Restrictions
Example usage:
To set up forbidden router ports:
DES-3526:admin#config router_ports_forbidden default add
2-10
Command: config router_ports_forbidden default add 2-10
Success.
DES-3526:admin#
enable igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable IGMP snooping on the Switch:
DES-3526:admin#enable igmp_snooping
Command: enable igmp_snooping
Success.
DES-3526:admin#
disable igmp_snooping
Purpose
Syntax
Description
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
This command allows designation of a port or range of ports as being
forbidden to multicast-enabled routers. This will ensure that multicast
packets will not be forwarded to this port − regardless of protocol, etc.
<vlan_name 32> − The name of the VLAN on which the router port
resides.
[add | delete] - Specifies whether to add or delete forbidden ports of
the specified VLAN.
<portlist> − Specifies a range of ports that will be configured as
forbidden router ports.
Only Administrator and Operator-level users can issue this command.
Used to enable IGMP snooping on the Switch.
enable igmp_snooping {forward_mcrouter_only}
This command allows users to enable IGMP snooping on the Switch.
If forward_mcrouter_only is specified, the Switch will only forward all
multicast traffic to the multicast router, only. Otherwise, the Switch
forwards all multicast traffic to any IP router.
forward_mcrouter_only − Specifies that the Switch should only
forward all multicast traffic to a multicast-enabled router. Otherwise,
the Switch will forward all multicast traffic to any IP router.
Only Administrator and Operator-level users can issue this command.
Used to enable IGMP snooping on the Switch.
disable igmp_snooping {forward_mcrouter_only}
This command disables IGMP snooping on the Switch. IGMP
snooping can be disabled only if IP multicast routing is not being
used. Disabling IGMP snooping allows all IGMP and IP multicast
151

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack des-3526Xstack des-3526dcXstack des-3550

Table of Contents