D-Link xStack DES-3500 Series Manual page 26

config greeting _message
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To modify the banner to read "Good evening Mr. Bond.":
DES-3526:admin# config greeting_message
Command: config greeting_message
Greeting Messages Editor
================================================================================
Copyright(C) 2004-2007 D-Link Corporation. All rights reserved.
================================================================================
<Function Key>
Ctrl+C
Ctrl+W
--------------------------------------------------------------------------------
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to configure the login banner (greeting message).
config greeting _message {default}
Users can use this command to modify the login banner (greeting
message).
default – If the user enters default to the modify banner command, then
the banner will be reset to the original factory banner.
To open the Banner Editor, click enter after typing the config
greeting_message command. Type the information to be displayed on
the banner by using the commands described on the Banner Editor:
Quit without save:
Save and quit:
Move cursor:
Delete line:
Erase all setting:
Reload original setting:
Only Administrator and Operator-level users can issue this command.
Other restrictions include:
•
If the "reset/reset config" command is executed, the modified
banner will remain modified. However, the "reset system"
command will reset the modified banner to the original factory
banner.
•
The capacity of the banner is 6*80. 6 Lines and 80 characters per
line.
•
Ctrl+W will only save the modified banner in the DRAM. Users
need to type the "save" command to save it into FLASH.
•
Only valid in threshold level.
DES-3526 Fast Ethernet Switch
Command Line Interface
Firmware: Build 5.01-B47
Quit without save
Save and quit
Ctrl+C
Ctrl+W
Left/Right/Up/Down
Ctrl+D
Ctrl+X
Ctrl+L
<Control Key>
left/right/
up/down Move cursor
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
22