| vertical bar
Purpose
Syntax
Description
Example
Command
{braces}
Purpose
Syntax
Description
Example
Command
Basic Switch Commands
The basic switch commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following table.
Separates two or more mutually exclusive items
in a list, one of which must be entered.
show snmp [community | host]
In the above syntax sample, you must specify
either a community or host configuration to be
show.
show snmp host
Encloses an optional value or set of optional
arguments.
reset {config}
The command is used to restore the Switch's
configuration to the default setting assigned from
the factory.
reset config
57