D-Link xStack DES-3500 Series Manual page 87

delete stp instance_id
Description
Parameters
Restrictions
Example usage:
To delete STP instance ID 2 from the Switch.
config stp priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the priority value for instance_id 2 as 4096.
DES-3526:admin#config stp priority 4096 instance_id 2
Command : config stp priority 4096 instance_id 2
Success.
DES-3526:admin#
config stp mst_config_id
Purpose
Syntax
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
This command allows the user to delete a previously configured
STP instance ID from the Switch.
<value 1-4> Enter a value between 1 and 4 to identify the
Spanning Tree instance on the Switch.
Only Administrator and Operator-level users can issue this
command.
DES-3526:admin#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DES-3526:admin#
Used to update the STP instance configuration
config stp priority <value 0-61440> instance_id <value 0-4>
This command is used to update the STP instance configuration
settings on the Switch. The MSTP will utilize the priority in selecting
the root bridge, root port and designated port. Assigning higher
priorities to STP regions will instruct the Switch to give precedence to
the selected instance_id for forwarding packets. The lower the
priority value set, the higher the priority.
priority <value 0-61440> - Select a value between 0 and 61440 to
specify the priority for a specified instance ID for forwarding packets.
The lower the value, the higher the priority. This entry must be
divisible by 4094.
instance_id <value 0-4> - Enter the value corresponding to the
previously configured instance ID of which the user wishes to set the
priority value. An instance id of 0 denotes the default instance_id
(CIST) internally set on the Switch.
Only Administrator and Operator-level users can issue this
command.
Used to update the MSTP configuration identification.
config stp mst_config_id {revision_level <int 0-65535> | name
<string 32>}
83