D-Link xStack DES-3500 Series Manual page 89

config stp mst_ports
Restrictions
Example usage:
To designate ports 1 through 5, with instance id 2, to have an auto internalCost and a priority of 16:
DES-3526:admin#config stp mst_config_id ports 1-5
instance_id 2 internalCost auto priority 16
Command : config stp mst_config_id ports 1-5 instance_id
2 internalCost auto priority 16
Success.
DES-3526:admin#
show stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-3526:admin#show stp
Command: show stp
STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Age
TX Hold Count
Forwarding BPDU
DES-3526:admin#
Status 2 : STP enabled for RSTP
DES-3526:admin#show stp
Command: show stp
STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Age
TX Hold Count
Forwarding BPDU
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
priority <value 0-240> - Enter a value between 0 and 240 to set the
priority for the port interface. A higher priority will designate the
interface to forward packets first. A lower number denotes a higher
priority.
Only Administrator and Operator-level users can issue this command.
Used to display the Switch's current STP configuration.
show stp
This command displays the Switch's current STP configuration.
None
None.
: Enabled
: STP Compatible
: 20
: 2
: 15
: 20
: 3
: Enabled
: Enabled
: RSTP
: 20
: 2
: 15
: 20
: 3
: Enabled
85