D-Link xStack DES-3500 Series Manual page 90

Status 3 : STP enabled for MSTP
DES-3526:admin#show stp
Command: show stp
STP Status
STP Version
Max Age
Forward Delay
Max Age
TX Hold Count
Forwarding BPDU
DES-3526:admin#
show stp ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show STP ports information for port 5 (STP enabled on Switch):
DES-3526:admin#show stp ports
Command: show stp ports
MSTP Port Information
----------------------
Port Index
Restricted role
External PathCost : Auto/200000
Port Forward BPDU disabled
BPDU Type : RSTP
Msti Designated Bridge
----- ------------------
0 8000/0050BA7120D6
CTRL+C ESC q Quit
show stp instance_id
Purpose
Syntax
Description
Parameters
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to display the Switch's current STP ports configuration.
show stp ports <portlist>
This command displays the STP ports settings for a specified port or
group of ports (one port at a time).
<portlist> − Specifies a port or range of ports to be viewed. Information
for a single port is displayed. If no ports are specified the STP
information for port 1 will be displayed. Users may use the Space bar,
p and n keys to view information for the remaining ports.
None.
: 5 , Hello Time: 2 /2 ,
: False, Restricted TCN : False
,
Internal PathCost
-----------------
200000
SPACE n Next Page
Used to display the Switch's STP instance configuration
show stp instance_id <value 0-4>
This command displays the Switch's current STP Instance
Settings and the STP Instance Operational Status.
<value 0-4> - Enter a value defining the previously configured
instance_id on the Switch. An entry of 0 will display the STP
: Enabled
: MSTP
: 20
: 15
: 20
: 3
: Enabled
Port STP enabled
Edge Port : No /No ,
Prio Status
---- ----------
128
ENTER Next Entry a
86
P2P : Auto /Yes
Role
----------
Forwarding Root
All