D-Link xStack DES-3500 Series Manual page 40

create snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP view:
DES-3526:admin#create snmp view dlinkview 1.3.6
view_type included
Command: create snmp view dlinkview 1.3.6 view_type
included
Success.
DES-3526:admin#
delete snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured SNMP view from the Switch:
DES-3526:admin#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to assign views to community strings to limit which MIB objects
and SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included |
excluded]
The create snmp view command assigns views to community
strings to limit which MIB objects an SNMP manager can access.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be included or excluded from access by an SNMP manager.
view type – Sets the view type to be:
• included − Include this object in the list of objects that an
SNMP manager can access.
• excluded − Exclude this object from the list of objects that
an SNMP manager can access.
Only Administrator and Operator-level users can issue this
command.
Used to remove an SNMP view entry previously created on the
Switch.
delete snmp view <view_name 32> [all | <oid>]
The delete snmp view command is used to remove an SNMP view
previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters that
identifies the SNMP view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be deleted from the Switch.
Only Administrator and Operator-level users can issue this command.
36