D-Link xStack DES-3500 Series Manual page 167

show dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the DHCP relay configuration:
DES-3526:admin#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy
Interface
----------
System
DES-3526:admin#
Example usage:
To show a single IP destination of the DHCP relay configuration:
DES-3526:admin#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
Interface
----------
System
DES-3526:admin#
enable dhcp_relay
Purpose
Syntax
Description
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3526:admin# DES-3526:admin#config
dhcp_relay option_82 remote_id default
Command: config dhcp_relay option_82 remote_id
default
Success.
DES-3526:admin#
Used to display the current DHCP/BOOTP relay configuration.
show dhcp_relay {ipif <ipif_name 12>}
This command will display the current DHCP relay configuration for the
Switch, or if an IP interface name is specified, the DHCP relay configuration
for that IP interface.
ipif <ipif_name 12> - The name of the IP interface for which to display the
current DHCP relay configuration.
None.
Server 1
------------
10.58.44.6
Server 1 Server 2
------------- ------------
10.58.44.6
Used to enable the DHCP/BOOTP relay function on the Switch.
enable dhcp_relay
This command is used to enable the DHCP/BOOTP relay function on
the Switch.
Server 2 Server 3
----------- ----------
Server 3
------------
163
: Enabled
: 2
: 23
: Enabled
: Enabled
: Replace
Server 4
-----------
Server 4
--------------