config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "DES-3526 Switch
enable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable RMON:
DES-3526:admin#enable rmon
Command: enable rmon
Success.
DES-3526:admin#
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3526:admin#config snmp system_location HQ
5F
Command: config snmp system_location HQ 5F
Success.
DES-3526:admin#
Used to configure the name for the Switch.
config snmp system_name {<sw_name>}
The config snmp system_name command configures the name of
the Switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Only Administrator and Operator-level users can issue this
command.
DES-3526:admin#config snmp system_name DES-3526
Switch
Command: config snmp system_name DES-3526 Switch
Success.
DES-3526:admin#
Used to enable RMON on the Switch.
enable rmon
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring (RMON)
on the Switch.
None.
Only Administrator and Operator-level users can issue this
command.
":
52